F.R.E.D. pager with GroupAlarm

Increase your accessibility with the use of dedicated alarm receivers in the mobile network

Increase your accessibility with the IoT pager from hk.digital. This gives you your own fully redundantly connected receiving device. The pager works in any available LTE CAT M1 network and can receive alarms up to 960 characters. You always have an overview of the status of each individual pager. All configurations are done in GroupAlarm, the pager no longer needs a programming station. The set-up and installation of 50 pagers is completed in 3-4 hours without prior knowledge and you can integrate the system directly into your operations.

Receives where other radio networks end: in underground areas, outside the company’s own / radio network or across international borders.
High reliability and redundancy through the use of all available network providers in national and international roaming
Complete 2-way alerting, technical and operational feedback
Always know who is coming through input of availability
Security through secured - IP connections with a closed user circle (VPN)
Secure alarm reception: Alarm is delivered repeatedly in case the pager is in a short radio dead zone or is turned off for a short time.
Long durability of the device** due to extremely robust housing (dust and splash-proof).
Favourable offer: Operating costs for five years already included in the purchase price

Benefits in combination with GroupAlarm

Use app, SMS and phone call automatically as fallback level.
Display of all important parameters of each individual pager (battery status, software, firmware, etc.).
Redundant connection of the pagers via direct connections from GroupAlarm to the highly available IoT infrastructure of Deutsche Telekom and Datamobile.
Complete management via GroupAlarm’s web interface, therefore no own infrastructure necessary
Extremely short triggering time due to permanent data connection (approx. 3-5 seconds after alarm triggering, even with large numbers)
Seamless mixed operation of participants with and without pagers possible
Can be expanded at any time by purchasing new devices

Proven with large organisations

With more than 2000 ERIC pagers (predecessor model of Unitronic), the district of Emsland has ensured the reliable alerting of its fire brigade and rescue services since September 2018. GroupAlarm is linked to the CELIOS® operations control system from CKS Systeme and achieves a delivery rate of over 98% within 30 seconds of the alarm being raised.

All at a glance

Whether you send a single message to the pager, lock the pager or reset it to factory settings - in the status view of the pagers you can do all the settings with just a few clicks.

Assignment and connection status

Pagers are assigned to the participants in GroupAlarm like telephone numbers. For this, you do not need to integrate or programme detector loops on the device, as the control of the detector is controlled via the labels.

Who are the pagers suitable for?

As the alarm is triggered independently of the organisation’s own infrastructure, the pagers are particularly suitable for organisations that do not have their own alarm network or whose radio network does not cover the required geographical area. Whether in the public safety sector, in plant fire brigades or on-call services in companies or hospitals, speed is of the essence when it comes to alarm delivery.